Piston Ring Compressor
#07019

Piston installation is fast and easy, and the chance of ring damage is greatly reduced using the Wizard's tool made from light weight billet aluminum. Available in any bore size.

Piston Ring Filer
#07047

A handy tool that makes an easy job of setting end gap on piston rings!

Professional Spark Plug Inspection Light
#07058

Has magnifaction and light for making spark plug reading easy.

Batteries not included!

Leak Down Extension
#07063

Makes hooking up air hose easy when performing a cylinder leakage test or holding pressure against valves for spring removal.

Depth Measuring Tools
#07061 - Simple Burst Panel Depth Gauge
#07066 - Billet Burst Panel Depth Micrometer
#07059 - Clutch Depth Measuring Tool

Quality Gauges - The right tool to get the job done right and made easier.

Feeler Gauge Grip Handle
#07067

Billet aluminum handle withassorted sized blades makes this tool a must for setting valves!

Tire Pressure Gauges
#07030 - 2 1/2" Liquid Filled, 0-15 lbs
#07032 - 4 1/2", 0-15 lbs
#07031 - 3 1/2", 0-15 lbs

Available in four different models for different applications.
#07030 - 2 1/2" Liquid Filled, 0-15 lbs
#07032 - 4 1/2", 0-15 lbs
#07031 - 3 1/2", 0-15 lbs

Dual Gauge Leak Down Tester
#07036

The only tool that will accurately measure cylinder and ring leakage!

Valve Truing & Straightening Fixture
#07040

A quick and easy way to check the trueness of valve heads. Also used in some applications to straighten valve stems.

Crank Hub Installation Tool
#07045

A tool designed specifically for hemi crankshafts!

Leakdown Tester Plate
#07054

Allows cylinder leakage to be tested with the cylinder head removed from the engine. Also allows the combustion chamber to be checked for cracks or valve leakage. Hard anodized billet aluminum construction, comes with all required hardware.

Heavy Duty Tubing Benders
#07115

Bends 3/16", 5/16" and 3/8" copper, steel or aluminum tubing without kinking or collapsing, Bender comes complete with two roller adapters.

Sleeve Pulling Tool
#07117

Available in sizes from 4.185" to 4.600". The only painless way of removing block sleeves from solid and water jacketed blocks. Shaft and knocker are made of steel while the puller plate is made from billet aluminum.

Centrifugal Clutch Feeler Gauges
#07119

Comes in sets of seven or individually from size 40to 70. A necessity when checking pack clearances before and after a run.

Professional Degree Wheel
#07122

This 18" aluminum degree wheel is a must for any professional. Its size makes it easy to read, and its strength makes it the most accurate wheel available. Anyone who has ever been tired and frustrated while degreeing their cam will appreciate this most accurate of all degree wheels!

Peg Style Head Holders
#07126

This is a great way to hold your cylinder heads in a stable position when doing any kind of head work.

Magneto Tester
#07127 & #07128

#07127 for Magnetos up to 5 Amps
#07128 For Magnetos up to 10 amps.
You can quit guessing about the condition of your mags and stop depending on uncomparable figures that you get from the track and other sources. You can check and compare your mags right in your trailer using these portable testers.

All Billet Brass Shop Hammer
#07179

It has an aluminum billet knurled handle and is real quality.

Heavy Duty Sleeve Puller 3/4 Shaft, 5 Lb Knocker Weight
#07180

Indicator Bracket For Rimac Spring Tester
#07181

This unique tool makes setting up valve springs on a Rimac Spring Tester a breeze. The bracket mounts to the spring tester shaft and allows installation of a dial indicator (not included) to measure spring height to .001”. This level of precision is crucial when measuring open pressure and height. The kit also includes a 1 ½”.standard and a 2” dial indicator extension tip.

Push Rod Length Checkers
#07183

All aluminum 10", 11", 12", 13" for end adjustors

Chassis Stabilizer Pancake Style
#08093

Chassis Stabilizer Pancake Style helps support chassis or motor when transporting in trailer. A real life saver for your chassis.

Axle Strap
#10016

This 6000 lbs test Axle Strap includes a rings and strap cover

96 Plug Spark Plug Rack
#10026

All aluminum, really nice piece. Allows for storage and comparison of several runs.

Aluminum Vise Jaws
#10027

Magnetically held in place and used to hold a variety of objects to include easily scratched aluminum fittings as well as hard to hold shapes. A necissity for ever trailer and shop!

Lapping Plate
#10055

Lapping plate for surfacing your manifold or blower. It’s very important to keep all surfaces flat for sealing. Comes with 2 gripped handles. ¾” steel plate blanched ground.

Spark Plug Rack
#10057

Easy to carry. Stores and organizes 64 gapped spark plugs, or can store used plugs for later reference. Made from stainless steel for strength and durability.

Aluminum Injector Tool Tray
#10058

This tray will hold all small items. 16 Spark plugs and has a convenient handle and mounting brackets. Measures 16” long, 11” wide, 2”deep.

Geddex Dial-In And Wheels-Up Marker
#10111 - 10112

Dial-In is white for your windshield. It is easily wiped off with a rag. Wheels-Up comes in three colors: White, Floro-Orange, Floro-Green. Applicator makes it easy to apply to wheelie bar wheels.

Digital Tire Gauge
#12025

Gauge will measure to 1/10 of a pound