TOLL FREE ORDERING!
800-282-3442
TOOLS CATALOG
This is a partial selection of our product line, for a complete listing, order your catalog today!
For price checks or to place an order,
CALL 800-282-3442
and tell them you saw it online!
| Tools Page 1 -|- Tools Page 2 | |
| Billet Pill & Nozzle Storage Plates #01019 holds 88 jets - #01018 holds 60 nozzles |
|
 |
Billet Pill & Nozzle Storage Plates keeps your nozzles assortment organized and at your fingertips. |
Laser Thermometer |
|
 |
Laser Thermometer uses an infra-red dot to register temperature in only one second—40 degrees F to 590 degrees F range. Is very handy for taking track temperture, engine pan, headers or other temperature sensitive areas. |
Poppet Tester |
|
 |
Everything you need to check 6 poppets, 8 poppets, and down nozzle pressure. This tool is a necessity for setting up fuel systems |
48 Volt Battery Pack with Charger |
|
 |
This is what you need to reallly crank it! Stand weighs approximately 50 pounds and comes with a charger with auto shut-off when battery is charged. Encased in an all aluminum frame. |
| Solid State Magneto Buzz Box #06006 |
|
 |
The only accurate way to set magneto points for proper timing. Can also be used as a continuity tester. Compatible with ignitions up to five amps, also available for over five amp generators. Requires 9 volt battery, not included. |
| 12 Volt Inductive Timing Light #06007 |
|
 |
Requiring no outside power source, this timing light makes setting ignition timing a breeze! Bright xenon bulb allows easy use in direct sunlight. |
3/4 " Billet C-Clamp For Removing Valve Springs |
|
|
Can be impact driven or used manually. Clamp uses acme threads on shaft for longer life and torrington bearings in valve head. Very durable for years of reliability. |
| Valve Spring C-Clamps Twin Beam Billet C-Clamp -#07001 • Steel C-Clamp - #07002 |
|
 |
#07001 - Twin Beam Billet C-Clamp for removing springs with the zoomies attached. #07002 Steel C-Clamp - A necessity for removing valve springs with head off the engine. Steel. |
| Spring Removal Tool #07003 |
|
 |
Tool enables mechanic to remove and replace valvesprings on hemi-head engines without removing the cylinder heads. |
| Valve Cover Inertia Wrench #07004 |
|
 |
The most unique feature about this tool is its weighted t-handle. It reduces the effort and increases the motion when removing the valve covers. One flip of the wrist spins the nut completely off! |
| Height Micrometer #07006 |
|
 |
A must when determining valve spring installed height. No messing around, simply slip over valve stem, install retainer and keepers, twist until tight, and read! Measures heights up to 2.100" tall. |
| RIMAC Spring Tester #07007 |
|
 |
The best bench top spring tester available. Will handle any type of spring, up to 2" diameter and up to 4 1/2" free length. Available in 0-250 pound, 0-350 pound, 0-500 pound and 0-1000 pound test scales. |
Bearing Micrometer |
|
 |
This is used to check the thickness of your bearings before and after a run. |
| Aluminum Wrench Set #07017 |
|
 |
This is a complete set of 6 billet aluminum wrenches. Comes in two different styles. A necessity for anybody working around aluminum AN fittings! |
| Jet Wrench #07021 |
|
 |
This handy tool will enable you to change jets with ease. Features a 9/16" socket on one end, and a matched screwdriver on the other. The driver is specially designed with a notch to eliminate damage to flowed Jets |
| Cam Checking Tool #07029 |
|
 |
Precision made billet shaft with internal mid-mount roller bearing to keep the tracking wheel properly aligned on the camshaft. O-rings keep the proper fit in the lifter bore to maintain accuracy. Comes complete with dial indicator. A necessity for anybody who degrees in camshafts! |
| Valve Adjusting Tool #07026 |
|
 |
Enables valve adjusting without the need of a third hand. Simple, easy and available in hex or slotted end. |
| Valve Spring Pressure Tool #07028 |
|
 |
Checks springs while installed on the engine. Saves time and money by knowing the condition of valvesprings. Works on any hemi-head engine. Handle is made of billet aluminum and all parts are anodized or plated. 2 1/2" gauge makes thisa very accurate and easy to read instrument. (In some cases, hook may require slight modifications) |
| Blower Rotor Fixture #07033 |
|
 |
The tough job of teflon installation is made easy by using the same fixture that the blower manufacturers use! The Wizard's Fixture can be bolted to a bench or clamped in a vise. All parts are plated. |
Wrist Pin Checking Fixture |
|
 |
A quick, simple, easy and accurate way to check the straightness of piston wrist pins. |
| Tools Page 1 -|- Tools Page 2 | |
