This kit is very handy. Every racer needs one. Use to transfer breathing air or CO2 from a larger container to a smaller bottle. Includes 4 ft hose.
Air Bottle Transfer Assembly
Union check Valve
These valves are a must have! They are used in dragsters and funny cars when disconnecting body (FC) from chassis to your pneumatic parachute launcher. It makes everything easier. 1/4" union check valves allow air flow in one direction and block air flow in the reverse direction. Union stop vaves block upstream air pressure when the downstream pneumatic tube is removed from the valve. These push -to-connect fittings have though thermoplastic bodies and stainless steel tube gripping claws.
Tether Kit for Funny Cars
Tether kit required by NHRA for Funny Cars.
Full Side Belt Guard
1 piece. Comes with end brackets pictured. Attaches to existing top belt guard.
If you don't see it, we still might have it!
We can't show it all, so give us a call!
Seat Belts, Aluminized, 5 way or 7 way
Quick Release. Available brands: D&J, Crow, Simpson, or White..
7 point also available
5-Point Safety Harness, Latch & Link
Lenco Reverser Blanket
Lenco Transmission 3-Speed Blankets w/Reverse
Also available LENCO Drive 2 speed transmission blanket $225.00
Cs1 and Cs2 2 speed transmission blanket $195.00
Burst Panel Kit w/ cross support & 1 panel
Kit includes; 3 gaskets,1 cross plate,1 frame,24 screws & 1 panel
Dual Burst Panel Kit
Kit conains: Cross support, 2 frames and 2 panels, 5 gaskets & 24 screws
Parachutes for Dragster, Funny Car, ProMod
Aluminized Pack, Choice of colors and brands. We sell Simpson, D&J, and White
Parachute Pack, Silver
Heavy Duty Pop Chutes
Pop Chute Bridal Cord
Blower Restraints, SFI, Complete 14-1 w/Hardware
Comes complete with 4 pins, 4 straps, 4 brackets, and 14-1 plate. NHRA certified.
Burst Panel Kit
Kit Includes Frame, Screws, 2 Gaskets, 1 Burst Panel
Large Burst Panel Intermediate Support Plate
Burst Panel 6 x 3"
Quantity discount for Set of 6 $90.00
Sold individually @$20.00
Regular Burst Panel Gasket 6 x 3"
Burst Panel Frame and screws
Burst panel frame for 3" x 6" burst panels. Comes with 24 screws
Neck Collars, Nomex, Wedged
Blower Bag Complete w/Brackets, Roots Style 14-2 Kevlar
Billet Burst Panel Deflector
Comes with screws and 2 gaskets.
Driving Gloves, FC, Diest or D&J, SFI 20 or 15
Available in -20--- $180.00
Available in-15--- $136.00
Fire Retardant Seat Material
Enough material to cover front and back of seat.
Nomex Fire Boots, SFI 20
Specify size and color
1/4" Tubing for Fire Ext System, 25 ft
Fire Bottle Plungers for Coldfire Bottles
Fire Bottle Plungers for Halon Bottles
Parachute Shroud Nomex Line Covers, ea
Aluminized 7ft in length
Burst Panel Stud Kit
Kit contains 24 studs and nuts. Available in short or long length.
10 lb Replacement Fire Bottles (Cold Fire)
Not in stock
Blower Belt Guard, RCD Style
Complete with Side Guard
#4042 RCD Style Top Belt Guard with Starter Ring $251.00
#4043 RCD Style Top Belt Guard without Starter Ring $238.00
#4044 RCD Style Middle Support Bracket $155.00
#4045 RCD Style Bottom Side Plate $50.95
Engine Diapers, SFI
Call for different models
Ballistic Nylon Diaper, SFI 7.2 $205.00
Ballistic Nylon Diaper, SFI 7.1 $595.00
Soft Kevlar Diaper, SFI 7.1 $850.00
Cold Fire Distribution Head for #4 AN
Cold Fire Distribution Head for 1/8 Female Pipe
Parachute Cable, Light Weight
16 feet long
Mag Wire Fire Proof Sleeving
Use in front of burst panel
Replacement Diaper Absorbent Pad
Parachute Tag Reminder, Florescent
Parachute Reminder Tag
Bright color makes it easy to see.
Blower Restraint Bracket
Set of 4 With pins $145.00
wo/ pins $105.95 set of 4
Blower Restraing Bell Housing Bracket, Steel ea w/pin
Blower Restraint Brackets, Set of 4 w/Pins
3/8 Restraint Bracket Pin
Small burst Panel Frame and Screws
Frame for small burst panel (2 1/2" x 4 1/4") Includes 18 screws.
Small Burst Panel 4 1/4 x 2 3/8
Small Burst Panel Intermediate Support Plate
Bell Housing Inspection Cover Dust Blanket
Halon Distribution Head for 1/8 " Female Pipe
Halon Distribution Head for 1/4" Tube
Plunger Arm Assembly for Fire Bottles
Halon Distribution Head 1/8" male pipe
Hemi Oil Pump Cover
Plunger and Activation Arm Assembly f/Coldfire bottles
Parachute Line Detangler
2 gallon Pail. Use on underside of a Funny Car Body. It takes 2 gal for one application. SFI Approved. Ships FedEx.
Small Burst Panel Kit
Kit includes: 18 screws, 1 small panel 2 1/2" x 4 1/4", small frame, small cross plate
Burst Panel Deflector Chimney
If you already have a deflector, no need for anything else. Just buy the chimney as an add on. It bolts right to your existing deflector #4023. This unit will save your blanket, windshield, body, fuel lines, and wires. It's cheap insurance. This piece fits PSI Blowers with rear mounted deflectors.