Front mounted Mag and Fuel Pump Drive
MSD Kill Solenoid
Heavy Duty Circuit Tester
Nylon Wire Terminal Kit
180 pieces. $29.95
Shrink Wrap Assortment Kit
54 pieces 6" Pieces, 6 sizes. $24.95
Waterproof Repair Pig Tail Socket
3- Wire Male $5.95
Waterproof Repair Pig Tail Socket
Female 3-Wire $5.95
Thin Rocker Switch
Thick Rocker Switch
Red Indicator Light
Push in hole to attach. $3.95
Momentary Push Button Switch
Waterproof Momentary Push Button Switch
Wire Stripper & Cutter
A quality tool. Self adjusting stripper from 10-22 GA. $18.95
A quality Crimper at a reasonable price. Crimps wire from 10GA to 22GA. $28.95
Heavy Duty Red Button Kill Switch
Heavy duty. Red button is 1 1/2" diameter. The black box measures 2 3/4" long, 2" wide, and 1 7/8" deep.
Distributor Cap MSD & Ford, black
MSD Pro Mag Cap Replacement Adapter Ring Base-BLACK
MSD # 74563 BLACK
MSD Pro Mag 5" Mag Cap-BLACK
MSD # 74083 Black
MSD Pro Mag 5" Wire Hold Down-BLACK
Black color MSD part 74093
Used Mallory Electronic Super Mag Generator X
Sold as is
If you don't see it, we still might have it!
We can't show it all, so give us a call!
8.5 MSD Spark Plug Wire Set single or dual
8.5 mm red or black spark plug wires single. $190.00
dual set- $350.00
Hemi Distributor Shaft Stabilizing Collar
Solid State Magneto Buzz Box
The only accurate way to set magneto points for proper timing. Can also be used as a continuity tester. Compatible with ignitions that use points, not MSD Magnetos. Requires 9 volt battery, not included.
Mallory/ FIE Supercoil New Style
Hemi Distributor Shaft to Oil Pump Gear Engagement Coupler
8 MM Wire Separators (Single Set)
Coil Leads for Mallory
Mag Lead to Coil (Mallory) w/Plug
Single or Dual Mag Kill Switch
Big Red Button. Pull to Start, Push to Kill, for MSD 44 Amp Mags. Is used in conjunction with MSD Kill Solonoid.
Dual Mallory Mag Kill Switch
Bronze Distributor Gear for Hemi mallory
Heavy Duty Shrink Sleeve for Wire Protection
Billet Mag Base Hold Claw
Mallory Magneto Points
Mallory Magneto 4 Prong Coupler
Mallory Magneto IV Condensors
MSD Ratcheting Crimping Pliers
MSD part # 3505
Billet Mag Clamp (3 piece)
MSD Pro Tach Convertor
MSD part # 8132
MSD RPM Actuated Magneto Switch
MSD Mag Cap/Rotor Kit
MSD part # 8119
MSD 5" Cap Conversion Kit
MSD part # 7455
MSD Pro Cap
MSD part # 7408
MSD Pro Rotor
MSD part # 7423
MSD 44Amp Points Box w/Rev Limiter
MSD part # 8147
MSD 44 Amp Coil
MSD part # 8142
MSD 44 Amp Magneto
Get a SET of MSD Wires FREE with purchase of Mag.
Specify Chevy or Chrysler
Ignition Wire Protective Sleeving
25 ft roll. Used to help insulate spark plug wire.
F I E 90 degree Crank Trigger Pickup
Also available in straight.
Hemi S/S Wire Set (single) for Mallory Mags
Stabilizing Collar Linkage
5/16 heims. Goes with item #06095
Retard Selector Switch (0-11 Degree)
MSD part # 8676
Vibration Mounts, Pro Mag
MSD # 8822 $31.95
msd 8823----small vibration mounts $15.95
MSD Rubber Module Storage Pad
MSD # 87551
MSD Changeover Switch
MSD part #7990
MSD Pro Cap Rotor Rebuild Kit
MSD part # 7411
12 Volt MSD Timing Light
Black Wire Protection Sleeving
Coil 25 ft, 3/8" id , MSD 3411
MSD Pro Cap Replacement Adapter Ring
MSD Cap Hold Down
Mag 44 Lead Extension
MSD 44 Amp Replacement Black Ring
MSD Pro Cap Wire Retaining Ring
MSD 7409 Red
MSD Crab Cap for MSD Distributors
MSD 44 Amp Points Box without Rev Limiter
Coiled Push Button Switch
Used in an auxillary ignition on/off button. To be mounted on steering wheel. Also referred to as Alternate Action Switch.
Hemi Crank Trigger & Pointer Bracket Assembly
Includes mounting brackets, crank trigger slide holder, pointer, and bolts.
RCD Degree Ring Pointer
Crank Trigger Bracket Pickup Holder
Intermediate Adapter Cable
Self Vulcanizing Tape
12 feet, MSD #3410
Dunn Cross Drives
Steel, MSD 8107
Autometer Pro Control for RPM & Light MSD
Autometer # 5302 Reduced from
$199.00 to $149.95
Module Kit (5 Chip Set)
- 12016-- 7,000 RPM Series Set
- 12017-- 8,000 RPM Series Set
- 12018-- 9,000 RPM Series Set
- 12016--10,000 RPM Series Set
- 12036--11,000 RPM Series Set
5, 1-5, 5-10, 10-15
Hemi Timing Cover Gasket
Chrysler Offset Mag Drive
This offset mag drive is also available for Chevy. It comes in different offsets.
Hemi Spark Plug Tubes
- 6015 Hemi Spark Plug Tube, Hemi (short)
- 6016 Hemi Spark Plug Tube, Fathead (long)
Mallory Magneto Rotor
Mallory Magneto Cap
Mallory Magneto Rotor Adapter
Mallory Magneto Condensor
Mallory Magneto Cap Wire Retention Lid
Dunn Dual Replacement Belt
When ordering will need distance between two pulleys
measurement will be 6" or 6 1/4"
Coil Post Extenders & Jumper Wire, Single Mag
Single mag $29.95 dual mag $58.95
Pneumatic Electronic Clox Box w/Case
Use to set Air Timers
Mallory Poly Coupler for Mag Base
Taylor Coil Wire Kit, Stainless Steel Replacement
Taylor 409 Stainles Steel Single Spark Plug Wire Replacement
Mallory Magneto 2 Prong Connector
MSD # 7920
MSD Pro Mag Six Shooter
MSD # 8158
NGK Spark Plugs B10,B9ES
B9ES sold in quantities of 10 per box
B10 sold in quantities of 4 per box
NGK Spark Plugs R5600 Series
Sold in quantities of 4 per box.
NGK Spark Plugs 6061 Series
Sold in quantities of 10 per box.
Mallory Base Stabilizing Assembly
Fire Core Hemi Ignition Wire Set
Custom fitted. You don't have to put anything together! Numbers are installed on each wire. Seals in spark plug tube for solid connection. Used by all the Pros. Lasts 30% longer than other ignition wires as reported by Pros.
Universal Spark Plug Gapping Tool
Comes with side strap spreader. Can be clamped on a vise or mounted on a table.
MSD Mag timing ring & wrench
This 2 part billet aluminum tool is used to accurately adjust the MSD mag while the engine is running. The aluminum ring remains clamped to the mag and the removable handle makes the job easy.
12 Volt Inductive Timing Light
Requiring no outside power source, makes setting ignition timing a breeze! Bright xenon bulb allows easy use in direct sunlight .Batteries not included.
MSD Stabilizing Collar
Very useful in supporting your 44 Mag.
Billet 15 Degree Offset Hemi Mag Drive
Single Mag Off Sets for Hemi
Billet Straight Base for Hemi Magnetos
Leahy TDC Pickup , Straight
Made for clamping bracket.
For checking when the points break or make contact. This is not a continuity checker. It works great.
Shrink Sleeve Numbers for Spark Plug Wires.
Very handy and readable.
Wire Ties for Spark Plug Wires
Optional Mag Stabilizing Collar Mount Kit
Can bolt these to valve cover or other appropriate mounting points.
Leahy TDC Pickup, 90 degree
Leahy Crank Trigger Pickup , 90 degree
Leahy Crank Trigger, straight
Extra Heavy Duty Magneto Generator Base Clamp (1/4" T Bolt)