Fuel tank foam to keep fuel from sloshing. Use with gasoline or alcohol. Sizes: 14" x6" x 1 1/4" or 13 1/2" x 5 1/2" x 2 1/4"
Fuel Cell Foam
Front mounted Mag and Fuel Pump Drive
Bolt on $465.00
Quick release $485.00
RCD Billet Fuel Pump Clamp-New Style
New Style Black Anodized
If you don't see it, we still might have it!
We can't show it all, so give us a call!
Enderle Injector, Aluminum Bird Catcher
With Nitro Style Barrel Valve
Enderle Big & Ugly Injector, Tall, Complete
Call us & compare before you spend too much!
BAU-1 Complete.5 9/16 " Butterflies and 10.5" Tall
Enderle Injector, Buzzard, Aluminum
With Nitro Style Barrell Valve, Complete
Enderle Big & Ugly, Short
8.3" Tall, Available with 3 butterfly diameters: 4.37", 5.00", or 5.562"
Replacement Screens for Fuel Funnels
Fuel Shutoff Bracket
Pneumatically Operated Valve
Pneumatically operated normally closed or open valve.
port size 1/8 pipe thread
Injector Port Line Set
Bird Injector Hat Line Set
Buzzard Injector Hat Line Set
Fuel Shutoff 3-Way
#8 Shut-off-- $129.95
#10 Shut-off-- $171.95
#12 Shut-off-- $171.95
For manifold or injector, Brass or Aluminum
length for nozzle bodies:
1.50, 2.00, 2.625
By Pass Pills and Nozzles
01024 By Pass Pills--$3.95
1 1/4" ALUMINUM TUBE (FROM TANK TO PUMP) 3 OR 6 FT
SOLD PER FOOT
1 1/2" ALUMINUM TUBE (FROM TANK TO PUMP) 3 OR 6 FT
High Speed Check Valve #6 Poppet
3/8 Hex Fuel Pump Shaft & Coupler
#1028 3/8 Hex Fuel Pump Shaft and Coupler $36.95
#1029 7/16 Hex Fuel Pump Coupler $17.95
#1030 3/8 Hex Shaft Coupler 17.95
8 Port Distribution Block
Comes with Brass Fittings and #8 AN Fitting
12 Port Distribution Blocks
Comes with Brass fittings & #8 AN Fitting
Injector Shaft Double Arms 7/16
#8 High Speed Port Check Valve
Injector Shaft Single Arm
5/16 hole, non serrated
Poly 9.5 gal Fuel Cell
Reduced to $175.00. For Funny Cars or Roadster, Comes with red top filler cap. 12" 7/8 tall in back x 7" tall on slope. I.D 1 1/2" OD 2" outlet. 16 5/8 long base 13 1/2 wide.
System 1 inline Fuel Filter
01039 System I Inline Fuel Filter 6" $125.00
01040 System I Inline Fuel Filter 9" $150.95
OD is 2".
Comes with element. Individual parts of filter are also available.
Billet Fuel Manifold
Fuel Manifold has #8 inlet and 3 #6 Inlets for Injector
Bypass Jet Manifold
No need to disconnect hoses with this Trick manifold
Large Injector Shaft for Buzzard
Nitro Checker Kit with Case
#1047 Nitro Checker Kit w/Case 0-50% $139.95;
#1048 Nitro Checker Kit/ wCase 50-100% $139.95
#1049 Alcohol Checker Kit w/Case $139.95
#1079 Fuel Checker Beaker $39.95;
#1160 Hydrometer, Nitro 0-50% $69.95:
#1161 Hydrometer, Nitro 50-100% $69.95
#1162 Hydrometer, Alcohol $69.95
Throttle Bracket Extension
For Buzzard Catcher, Billet, Blower Mounted
Blower Mounted Bird Throttle Bracket
Injector Hat Mounted Throttle Bracket for PSI
Can be used on many other types of injectors.
Injector Mounted Buzzard Throttle Cable Bracket
Mounted under the injector, pointed forward 25 degree & 15 degree out is cable mounting point.
4 Port Distribution Block
Bird and Buzzard Barrel Valve Linkage
Has left and right heims. Specify application when ordering.
Brass Pill Canister
Poppet Spring and Shim Kit
#1058 #6 Poppet Spring & Shim Kit $26.95.
01059. #8 Poppet & Shim Kit
Shutoff O Ring Kit
#1061 #6 Shutoff O-Ring Kit $12.95
#1062 #8 Shuttoff O-Ring Kit $12.95
Barrel Valve O-Ring Rebuild Kit, Nitro Style
Outlet Barrel Valve T for Jet Can
#1064 #10 Outlet Barrel Valve T for Jet Can $23.95
#1065 #8 Outlet Barrel Valve T for Jet Can $21.95
#8 Fuel Outlet Barrel Valve T for 2 Jet Cans
#12 ORB to #12 Screw on Outlet w/2 Returns
#12 Orb Pump Inlet Fitting to #12 Screw on
# 1031 #16 Orb Pump Inlet Fitting to for 1 1/4 hose $24.95
#1075 #12 Orb Pump Inlet Fitting to #12 Screw on $32.95
#12 ORB Pump Inlet Fitting w/2 Returns
#01077 #12 O-RING, Has 2 returns for a 1 1/4" slip on hose (FOR ENDERLE) $39.95
#01036 #16 O-RING, HAS 2 RETURNS FOR 1 1/4" SLIP ON HOSE (FOR WATERMAN) $43.95
90 Degree Full Flow Injector Hose Ends
For tight fit
Port Distribution Y Block
Fittings sold extra.
Clip on Burnout Limiter
Spring loaded pin, easy to install. Cut to length for burnout.
Injector Shaft Stop
For Bird, Buzzard, and Big and Ugly Injectors
Injector Shaft Stop, Aluminum
Aluminum, Light weight, Fits 7/16 Shaft
Combination Shutoff and Manifold
Barrel Valve Linkage
Billet Fuel Pump Clamp
Made of billet aluminum, not quick release.
High Speed Assembly
This assembly is made up of a #6 Poppet, Jet Can, and Single Barrel Valve T
#6 Check Valve Body
#6 Male to #6 Female
Nitro Style Barrel Valve -blown alcohol or blown alcohol psi blowers
K Style Metering Valve Assembly for Blown Alcohol. Also available for PSI Blown Alcohol.
16 Port Distribution Block
Comes with brass fittings and #8 fitting.
High Speed Check Valve #8
Fuel Cell Cap
Aluminum Cap and neck with gasket, bolts, & nuts. Your red plastic caps on your fuel tank are hard to remove when hot in sun. This cap will never have this problem & is easily removed.
Enderle Primer Check Valve
Injector Hat Cutoff Style Nozzle Body
Injector Ball Port Check Body
Automan Port Distribution Y Block
Fittings sold separately.
Waterman Pump Manifold
Enderle Fuel Pumps
|80A-0 Pump||4.5 gmp $550.00.|
|80A-0.5 Pump||5.5 gmp $550.00|
|80A-1 Pump||7.1 gmp $550.00|
|600 Pump||9.2 gmp $600.00|
|760 Pump||11.2 gmp $600.00|
|110 Pump||13.4 gmp $600.00|
|990 Pump||15.7 gmp $699.00|
|1100 Pump||17.2 gmp $775.00|
|1200 Pump||18.8 gmp $800.00|
|1270 Pump||20.2 gmp $850.00|
#12 ORB to #16 Screw on Inlet Fitting
ORB Fitting to AN Screw on
Call for best price available anywhere.
Extended Injector Inlet Fitting #8 orb to #8 or #10 Screw-on
O-ring Plug, Middle Hex
Specify Orb Size
Call for best prices anywhere!
Waterman Little Bertha fuel Pump
Aluminum Housing $1795.00
Steel Housing $1850.00
Specify Gallons needed.
Inlet Fitting, #12 Orb to #20 Screw-on w/2 Returns
Inlet Fitting #12 Orb to #16 Screw-on w/2 Returns
Over Center Retention Spring Bracket Assembly for Fuel Shutoff
Clamps on Fuel Shutoff
Electronic valve assembly
Specify lean out or normally open version
Injector Bracket for Most Injectors
This bracket can be mounted on most Enderle, JBR, Faulk, CG, Veney, and PSI injectors. The throttle cable bracket can be mounted in several locations to get proper cable alignment. It has a 20 degree angle to clear magnetos.
Injector Bracket for ENDERLE Big & Ugly
Fits Enderle Big and Ugly and many other injector types.
Injector Hose, Individual
Straight ends --$14.75
With 1 90 degree end --$27.75
Primary & Secondary Throttle Return Springs
Sold separately also
Air Operated Leaner Valve
Air operated normally open valve used for leaning fuel system
Fuel Pump Quick Release Adapter Plates
The fuel pump quick release adapter plates make removing pump an easy job. Unit mounts to front of pump extension.
Fuel Pump Extension
The fuel pump extension mounts on front cover and comes in several lengths.
Specify length in 1/2 " increments.
Starts at $125.95
Fuel Pump Quick Release Clamp
Billet Pill Storage Plate
Holds 72 jets.
Billet Nozzle Storage Plate
Holds 48 nozzles.
Everything you need to check #6 poppets, 8 poppets, and down nozzle pressure. This tool is a necessity for setting up fuel systems.
Mounts on opposite side of barrel valve with studs.
Fuel Pump Shutoff Bracket
For Waterman Pumps
Hilborn Throttle Bracket.
It's easier to buy this bracket than to make it. Bolts to back of injector. Bracket is adjustable. Simple installation.
Billet Carbon Fiber Throttle Bracket
Very strong and reliable.